RE: [EnergyPlus_Support] Transfering the Geometry from Revit?

["Eric Yang" <eric.yang@xxxxxxxxxxxxxx>]

Previously I have tried Green building studio.  It requires additional
work and careful setup in Revit to get a right GBXML file for the input.
For Energyplus 1.4 I didn't get it through though for one particular
project.  Not sure about 2.0 verison.

 

Eric

 

________________________________

From: EnergyPlus_Support@xxxxxxxxxxxxxxx
[mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Griffith, Brent
Sent: Thursday, May 10, 2007 5:50 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: RE: [EnergyPlus_Support] Transfering the Geometry from Revit?

 

It isn't possible to do it "directly." But I believe this is a service
offered by Green Building Studio.

________________________________

From: EnergyPlus_Support@xxxxxxxxxxxxxxx
<mailto:EnergyPlus_Support%40yahoogroups.com> 
[mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx
<mailto:EnergyPlus_Support%40yahoogroups.com> ] On Behalf Of alireza
taghinazari
Sent: Thursday, May 10, 2007 12:54 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
<mailto:EnergyPlus_Support%40yahoogroups.com> 
Subject: [EnergyPlus_Support] Transfering the Geometry from Revit?

Greeting,

1. I was wondering is it possible to transfer the geometry of a
building from the Revit directly and without any problem into energy
plus?

2. Can EP work in parallel with Revit to make adjustments to the
design in an interactive way?

Thanks,
Reza

---------------------------------
Ahhh...imagining that irresistible "new car" smell?
Check outnew cars at Yahoo! Autos.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

 



[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/