[EnergyPlus_Support] Re: zone load

["Richard Raustad" <RRaustad@xxxxxxxxxxxx>]

The term "zone load" is meaningless unless the zone is controlled. And 
when the zone is controlled, for any given hour, the load will change 
when you change the set point. You will have to use a thermostat in the 
zone and control that zone to some temperature. You can either use HVAC 
equipment or purchased air.

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "anca_unica" 
<anca_unica@...> wrote:
>
> Hi all,
> I wonder if someone can tell me which report variables show the zone 
> total load. The model is a cube with a large west-facing window, 
> massive walls/roof/floor, and infiltration; without any  HVAC system. 
> The only way to do this is to use Purchased Air? I hope that it is 
not 
> so!
> Bye
>




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/