[EnergyPlus_Support] How to set a unitary HVAC system air inlet node into a zone?

["laurentvidal50" <laurent.vidal@xxxxxxxxx>]

Hello,

I'm wondering how can I supply a HVAC system with air from a zone
(atrium) instead of outside air.

I was thinking to use a Compact Unitary Single Zone system, expand the
idf then changing the air inlet node of the system.
But I'm not experienced with the system air path.

My questions are:
 - how set an air inlet node into a zone?
 - should I only change the air inlet node of the system or another
object in the idf?

Thank you for any help.
Laurent



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/