[EnergyPlus_Support] Perhaps an over simplification?

["bgavin99" <bgavin99@xxxxxxxxxxx>]

Hi All,
Im modeling a 3 zone building with three heating only zones , the plant 
is purchased hot water and the load is three underfloor constant flow 
coils.
A simple system but it hangs after the HVAC point before reporting 
surfaces.

I have used single letter node names eg "a" and simplfied nameing 
conventions with repeated us of  words eg"living" as a thermostat name, 
zone name, and schedule name, in the same object.
I can not think of any rules I have violated, Is there something I have 
missed?



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/