[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Glare index





Dear all,
 
I have a question about Glare Index.
 
First, I simulate an office with a single big window.  The width and the height of the window is 1.8m,  There are interior blinds for this window, the angle is 45 deg. Through simulation, I got a glare index in every hour.
 
Then, I divided the big window into 3 small windows (each is 1.8 (width)*0.6(height)  by defining three objects (all of them are windows) in FenestrationSurface:Details. And each small window has the same binds angle and width as the above one.
 
The problem is when I ran the two simulation, I found the difference of glare index in these simulations (only the number of window is different) is nearly 10%. I am confused with this phenomenon.
 
Could you explain the reason? I thought the result should be quite close since the total area of the window is the same.
 
Thank you.
 
JH


__._,_.___


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___