[Equest-users] Quick brain jogging question on cooling towers in eQuest

[Aulbach, John]

Can anyone give me a quick primer on cooling towers in eQuest? I am
trying to allow the tower to now allow a lower leaving water temperature
(couldn't before because of a single stage absorber in CW loop).
 
Want make sure I change the correct parameters (which are NOT
straightforward).
 
Thanks in advance. I've done this before, but have a brain cramp
apparently.
 
John R. Aulbach, PE, CEM
Project Manager
Nexant, Inc.
701 West Kimberly Ave., Suite 245
Placentia, CA 92870-6342 USA
Phone: 714-524-4402
Fax: 714-524-4407
email: jaulbach at nexant.com
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080430/a7c0795f/attachment-0002.htm>