[Equest-users] Heat Recovery Device and Economizer problems

[Patrick Darby]

Hello,
 
I have a CDQ taking in 100% Outdoor Air, and providing this air to two
air handling units. There is both a heat recovery enthalpy wheel and a
water side economizer in the CDQ and when these are applied, in the
month's of March, April, and November, my simulation outputs large
(seemingly random) spikes in Total system supply air flow rate (cfm) for
the CDQ and in-turn the ventilation fans providing the power. But when I
disconnect these two devices I get nice results. Would anyone know why
this would be?
 




Patrick Darby, BScE








Mechanical Engineering Services
 
 
The Walter Fedy Partnership 
Phone: 519-576-2150 x271
Fax: 519-576-5499
Web: www.twfp.com
 

The information contained in this e-mail is intended only for the individual or entity to whom it is addressed. Its contents (including any attachments) may contain confidential and/or privileged information. If you are not an intended recipient you must not use, disclose, disseminate, copy or print its contents. If you receive this e-mail in error, please notify the sender by reply e-mail and permanently delete the message. Information, opinions or conclusions contained in this message that do not relate to the official business of "The Walter Fedy Partnership" will be understood as neither given nor endorsed by it.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080811/a89e3593/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: twfp.jpg
Type: image/jpeg
Size: 8530 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080811/a89e3593/attachment.jpg>