[Equest-users] Under heating

[Patrick Darby]

Hello All,
 
After Simulation and looking through reports SS-R and SS-O, I have had a
continuing problem of under heating in my Thermal Zones. I have allowed
my boiler capacity, all my heating coils, my heating pump parameters to
default and DOE size, but these actions are of no resolve to the under
heating. 
 
Has anyone else ran into this problem, and found a reasonable solution
to the problem of under heating?
 
Thank you for any help.
 




Patrick Darby, BScE








Mechanical Engineering Services
 
 
The Walter Fedy Partnership 
Phone: 519-576-2150 x271
Fax: 519-576-5499
Web: www.twfp.com
 

The information contained in this e-mail is intended only for the individual or entity to whom it is addressed. Its contents (including any attachments) may contain confidential and/or privileged information. If you are not an intended recipient you must not use, disclose, disseminate, copy or print its contents. If you receive this e-mail in error, please notify the sender by reply e-mail and permanently delete the message. Information, opinions or conclusions contained in this message that do not relate to the official business of "The Walter Fedy Partnership" will be understood as neither given nor endorsed by it.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20081204/46fe2a59/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: twfp.jpg
Type: image/jpeg
Size: 8530 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20081204/46fe2a59/attachment.jpg>