[Equest-users] Interior Wall Surface Type

[Eric O'Neill]

Check that your wall construction is set properly. I believe if the construction is not compatible with an "air" type, eQuest rejects and resets the selection. You can either pull the default Air Wall construction from the library, or change the current construction to a U-Value input rather than a Layered input (assuming this construction isn't used in other walls) and change the U-Value to a minimum of 2.7.

 

Hope that helps, 

 

Eric 

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Lam, Linda
Sent: Monday, December 22, 2008 12:49 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Interior Wall Surface Type

 

Dear Equest Users:

 

Why does my Interior Wall Surface Type keep jumping back to "Air" when I want it to be "Standard"?

 

Thanks!

 

  Linda Lam, LEED® AP
WSP Flack + Kurtz
405 Howard Street, Suite 500
San Francisco, CA 94105
Direct: 415.402.5813
Main Tel: 415.398.3833
Fax: 415.433.5311
website: http://www.wspfk.com
vCard: http://vcards.wspfk.com/vcardloader.php?filename=flackkurtz-linda-lam-wspfk-com-1227040073.vcf
image: <http://vcards.wspfk.com/usercard.php?filename=flackkurtz-linda-lam-wspfk-com-1227040073.png>   

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20081222/a9afc98f/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 266 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20081222/a9afc98f/attachment-0002.png>