[Equest-users] Domestic Water Heater without circulation loop

[Steven Gates]

If you don't specify a pump, then there is no recirculation; the "loop" is
then simply a one-way run.

 

  _____  

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Alison
Staudinger
Sent: Monday, July 21, 2008 11:41 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Domestic Water Heater without circulation loop

 

Does anyone know how to model a water heater system that is not attached to
a loop?  My system is completely heat traced so there is not a circulation
pump or loop that returns to the heater.  Every time I create a heater is
automatically wants a loop and I can't find a way to get rid of it or to
induce the electric heat trace load.  Any comments would be great!  Thanks!


 

Alison Staudinger P.E., LEED AP

JDRM Engineering

5604 N. Main St.

Sylvania, OH  43560

(419) 824-2400

 

--| Any project file attachments should be sent to files at jdrm.com

--| This mail and all information contained herein is the property

--| of JDRM Engineering, Inc. for use by the intended recipient only !

--| Copyright (c) 2008 JDRM Eng, Inc. All Rights Reserved.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080722/ffce9d7f/attachment-0002.htm>