[Equest-users] Envelope - Clearstory

Karen Walkerman kwalkerman at gmail.com
Fri Jul 25 13:14:09 PDT 2008


The easiest is to change the height of the room in detailed edit mode, and
then create the north facing exterior wall with the windows in it.

Hope this helps.

--
Karen

On Fri, Jul 25, 2008 at 12:42 PM, Daniel Wilkerson <DWilkerson at dwyer.com>
wrote:

>  Brendan – perhaps you could model it with skylights on a sloped roof?  Or
> maybe  create another floor with windows in DD for your clearstory?
>
>
>
>      -Dan
>
>
>  ------------------------------
>
> *From:* equest-users-bounces at lists.onebuilding.org [mailto:
> equest-users-bounces at lists.onebuilding.org] *On Behalf Of *Brendan Arnold
> *Sent:* Friday, July 25, 2008 12:39 PM
> *To:* equest-users at lists.onebuilding.org
> *Subject:* [Equest-users] Envelope - Clearstory
>
>
>
> Does anyone have good method for modeling clearstories.  The clearstories
> are on a southern zone but facing to the north.
>
> Can this be done in the DD wizard, or do I need to be in the Detailed
> Interface?
>
>
>
> Any help is appreciated. thanks.
>
>
>
> Brendan Arnold
>
> *MKE & Associates, Inc.*
>
> Ph: (503) 892-1188
>
> Direct: (503) 595-5964
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20080725/211fa681/attachment-0002.htm>


More information about the Equest-users mailing list