[Equest-users] FC RA Path?

Gary.Schrader at tac.com Gary.Schrader at tac.com
Mon Nov 17 13:56:27 PST 2008


Howdy folks,
 
I am trying to model several fan-coil units serving a classroom each.
The problem is that I need eQuest to simulate that the return air going
to the fan coils is coming from the plenum. Inside of the system
properties screen, the option to select my return air path is grayed
out, despite the fact that I created the building with a plenum space.
My hourly report that I am running on the plenum hourly temperature
would lead me to believe that the model is taking return air from the
space. Is there any way to change this, or is there any workaround I can
use to model this system with plenum air?
 
Thanks,
Gary Schrader
Engineer I

TAC
16011 College Blvd, Suite 212
Lenexa, KS  66219


Direct:	 +1 	
Fax:	 +1 913-469-0206	
Mobile:	 +1 913-217-8068	
Email:	 Gary.Schrader at tac.com	
Web:	 www.tac.com <http://www.tac.com/> 	

Notice: This email message, together with any attachments, contains
information of TAC, which may be confidential, proprietary, copyrighted
and/or legally privileged. This email is intended solely for the use of
the individual or entity named on the message. If you are not the
intended recipient, and have received this message in error, please
immediately return by email and then delete it. 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20081117/9bf04f87/attachment.htm>


More information about the Equest-users mailing list