[Equest-users] Geothermal Water-to-Water Heat Pumps, and VAV Terminals

[Jon Evans]

I have a unique system I'm trying to setup in Equest and was wondering if it
is possible, and if so, what the trick is.

I would like to couple a VAV system to water-to-water geothermal heat pumps.
So essentially I will have a VAV system on the terminal side and the heating
and cooling plants will be geothermal water-to-water heat pumps. One will
feed the chilled water coil in the air handler, and another the reheat coils
at the VAV boxes.

I can set up a heat pump chiller that feeds the air handler with a
geothermal condensing loop.  But I'm having problems attaching a heat pump
to the hot water loop, and the hot water loop to the geothermal condensing
loop.

Thanks for any insight you might have.  Hope everyone has a nice holiday!

Jon Evans, PE

Sustainable Engineering Group LLC
431 Charmany Drive Suite 102
Madison, WI 53719

Tel: (608) 231 9664 x 13
Fax: (608) 231 9665

E-mail: jevans at sustaineng.com 
Web: www.sustaineng.com