[Equest-users] Hello Everyone...I have a question

[Brian Fountain]

If you used the custom footprint and custom zoning then ensure your zone 
boundaries are within 1 foot of your footprint boundaries.  If not, they 
will not be created as exterior walls.  This is sometimes useful if you 
do not want exterior walls created (such as where there are adjoining 
buildings).

Chad Malone wrote:
> Good Afternoon Everyone,
>  
> I have input all my information into eQuest, and upon completion I ran 
> the "Simulate Building Performance" in order
> to obtain my reports. When I look at the 3D representation of the 
> building, some of my exterior walls are missing.Can
> someone help me with this?
>  
> Chad,
>
> -- 
> Robert C. Malone
> CEO
> MALONE Enterprises, Inc.
> Architectural and Engineering Design Services
> 404-704-5921 (tel)
> 770-476-8074 (fax)
> malone.inc at gmail.com <mailto:malone.inc at gmail.com>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>   
> ------------------------------------------------------------------------
>
> Internal Virus Database is out-of-date.
> Checked by AVG. 
> Version: 7.5.549 / Virus Database: 270.9.2/1783 - Release Date: 11/12/2008 10:01 AM
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20081124/e7414dd2/attachment-0002.htm>