[Equest-users] vtk output Window

[Gaurav Mehta]

Hi Vikram,

 

I experienced this error some time ago and I received a  response from
Scott Criswell as shown below:

 

These error messages are posted by the mechanism which manages the 3-D 
building display.  Often times these errors are an indication of very

minor issues with your building's geometry, but there have been a few 
times when we could find no errors in the geometry on models that still 
reported VTK error messages.<br> 
<br> 
Our recommendation is to re-check your model's geometry (as it sounds 
you have already done) and if the VTK errors persist then simply ignore 
them.  They have no effect on the operation of the DOE-2 input (BDL) 
and simulation modules or the output simulation results.<

 

 

 

Gaurav Mehta, LEEDR AP

Senior Project Energy Analyst

direct: 206.462.7658

fax: 206.285.7111 

 <http://www.rushingco.com/> www.rushingco.com

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Vikram
Sami
Sent: Tuesday, April 07, 2009 10:15
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] vtk output Window

 

Every time I open my project I get a window open up titled
vtkOutputWindow. It gives me the following error message: 

ERROR: In E:\vtk2.3\Nightly\vtk\common\vtkPolygon.cxx, line 1172

vtkPolygon (0x1478D268): Possible triangulation failure

There don't appear to be any BDL errors, and the model seems to be running
ok as far as I can tell. Its puzzling because I don't have an E: drive on
my computer. Any clues? Has this happened o anyone else?

Thanks

Vikram Sami, LEED AP
Direct Phone 404-253-1466 | Direct Fax 404-253-1366 

LORD, AECK & SARGENT ARCHITECTURE
1201 Peachtree Street NE, Suite 300, Atlanta, GA 30361
Responsive Design . Technological Expertise . Exceptional Service
Please visit our new website |  <file:///\\www.lordaecksargent.com\>
www.lordaecksargent.com

P Think GREEN before you print.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090407/b2ddd5ba/attachment-0002.htm>