[Equest-users] exhaust air

[aaronleelyt]

May be you can try to build a dedicated ventilation system, no heating, no cooling just with unit ventilator. Then change to the detailed design mode, in the component tree->air side HVAC parameters->outdoor air, you can find the item 'outside air from system'.  Hope this can help!

  
Aaron



在2009-08-18 03:36:21，"Lars Fetzek" <lfetzek at phoenixeng.us> 写道：

Verena's question here is very much like ayet unresolved question that I have.  If anybody knows the answer to her question, posting it could help us both!  Thanks.
 
Lars Fetzek, EI
Phoenix Engineering Group
Tampa, Florida


From:equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Verena Kindl
Sent: Monday, August 17, 2009 2:52 AM
To:equest-users at lists.onebuilding.org
Subject: [Equest-users] exhaust air



Hi,

 

thanks everybody for the great help. I still have a problem with my building. In the perimeter zones I have the IU  but in the core I only have exhaust air (corridor and restrooms) the air in the core is only coming from the perimeter it does not get any separate supplied air. Is there a way I can model a zone with only exhaust air? How can I tell the program that the core zone is getting its air only from the perimeter zone (OA-from system?) ? 

 

Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090818/efcb8f89/attachment-0002.htm>