[Equest-users] Heat Recovery Chiller with GS Loop

Larry Yang LYang at enermodal.com
Tue Aug 25 12:51:49 PDT 2009


Hi Hassan, 

 

If I understand right on your system, it is possible to use the ground source loop to be the condenser water loop which connects to your chiller.

Regards,

 

 

_______________________________
Larry (Lijun) Yang, M.A.Sc.
Energy Analyst

Enermodal Engineering Limited
650 Riverbend Dr., Kitchener ON N2K 3S2
t: 519.743.8777 x271  
f: 519.743.8778
e: lyang at enermodal.com 
w:www.enermodal.com 
P please consider the environment before printing this email

 

 

 

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Zareh, Hassan
Sent: August 25, 2009 3:20 PM
To: eQUEST-users at onebuilding.org
Subject: [Equest-users] Heat Recovery Chiller with GS Loop

 

Hello everybody,

I'm modeling a Heat Recovery Chiller tied on to a Ground Source loop. The system rejects the heat to a hot water loop. Anybody has any idea how this should be modeled?

 

Many thanks in advance.

 

Hassan Zareh, M.Eng., P.Eng., LEED AP
Project Engineer
Stantec Consulting Ltd.
100 - 401 Wellington Street West
Toronto ON M5V 1E7
Ph: (416) 598-7642
hzareh at stantec.com 

stantec.com <http://www.stantec.com>  

 

The content of this email is the confidential property of Stantec and should not be copied, modified, retransmitted, or used for any purpose except with Stantec's written authorization. If you are not the intended recipient, please delete all copies and notify us immediately.

 

ü Please consider the environment before printing this email.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090825/146adbdb/attachment-0002.htm>


More information about the Equest-users mailing list