[Equest-users] No space heating loads

[Oleksandra Onisko]

Hi All,

I have a zone that I created in the detailed design which has no heating loads. The zone has one exterior wall and the interior walls seem to be defined properly as eQuest is calculating a cooling load.  However, when I look at the LS-B Space Peak Load Components report, the time, dry-bulb temp, etc. for the peak heating load is blank and all the component values are zeros.  Any ideas on how to fix this?

Thanks,

Oleksandra Onisko LEED AP
EIT

MCW Consultants Ltd. <http://www.mcw.com/>
600-156 Front Street West
Toronto, ON M5J 2L6
Phone 416-598-2920
Fax 416-598-5394

This e-mail may be privileged and confidential. Any unauthorized use is strictly prohibited. If you received this e-mail in error, please contact the sender directly.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091217/a02330b2/attachment.htm>