[Equest-users] How to activate the input for blinds on theWindow-blinds tab?

[yizhao1 at vt.edu]

Hi Nick,
Thank you. I was trying to activate the blinds and slat data at the bottom of
Tab 2 in the detailed mode for parametric runs. It seems that only if the
windows are defined with layer-by-layer method, such inputs can be activated.

Thanks,

Ying

Quoting Nick Caton <ncaton at smithboucher.com>:

> Hi Ying,
>
>
>
> Do you mean within or after the wizards?  Attached is a screen grab of
> the location I intuitively look to add window blind
> definitions/schedules in the wizards - I tried but I could not find a
> way to make these specific pulldown inputs grey out.
>
>
>
> After the wizards, you can click on window of choice within the 3D view
> to quickly navigate to its entry in the component tree on the left, then
> double click that tree entry to open the 'window properties' window.
> From there you can access blind inputs on the 2nd tab - those will all
> be greyed out if you aren't in detailed mode...  I would recommend
> starting with the wizard screens if you're still at that stage.
>
>
>
> Does that help?
>
>
>
> ~Nick
>
>
>
>
>
>
>
> NICK CATON, E.I.T.
>
> PROJECT ENGINEER
>
> 25501 west valley parkway
>
> olathe ks 66061
>
> direct 913 344.0036
>
> fax 913 345.0617
>
> Check out our new web-site @ www.smithboucher.com
>
>
>
> -----Original Message-----
> From: equest-users-bounces at lists.onebuilding.org
> [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of
> yizhao1 at vt.edu
> Sent: Wednesday, December 02, 2009 4:46 PM
> To: equest-users at lists.onebuilding.org
> Subject: [Equest-users] How to activate the input for blinds on
> theWindow-blinds tab?
>
>
>
>
>
>
>
> Hi -
>
> Anybody know how to activate the input for blinds on the Window-blinds
> tab? The
>
> area is in gray and the input to activate it does not seem in the same
> tab.
>
>
>
> Many thanks in advance!
>
>
>
> Ying
>
> _______________________________________________
>
> Equest-users mailing list
>
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
>
>