[Equest-users] Need help

[Pasha Korber-Gonzalez]

Hi Susan,

this is a common problem in the design phases of modeling--My advice and
option of choice would be to use your "save as" files that you have been
creating with your inputs.  If you need to re-zone things you will need to
go back to your wizard file and edit your zones.  Keep in mind that when you
edit footprints and zoning in your file you will "erase" everything you had
input after the fact...

There are some other things you can do, but adding a new space or zone in
the ddedit mode might be too complicated at this point in your file.  If you
would like to discuss some of your other options feel free to contact me and
we can discuss in more detail.

Pasha
ph: 308-763-1593
On Tue, Dec 22, 2009 at 1:40 PM, Susan F <modelsenergy at gmail.com> wrote:

> I've been doing mostly models for core and shell buildings.  Typically by
> the time I get plans spaces are pretty well set.  More recently I've been
> tasked with some completely fit out buildings - LEED NC type.  The plans
> have been changing often yet they want me to proceed with the model.  How do
> you handle significant changes when spaces move around or change in size?
>
> Thanks in advance,
> Susan
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091222/6083c97a/attachment-0002.htm>