[Equest-users] R: Re: Details report

[fposer at libero.it]

Hi Steve

I'm a universitary student , and i'm working on a thesis whit Equest.

In my building simulation i use a WLHP, there are my LS and SS summary in file i've  wrote my problems.

Thank a lot
----Messaggio originale---- Da: smignogna at gmail.com Data: 12/02/2009 22.00 A: "fposer at libero.it"<fposer at libero.it> Cc: <equest-users at lists.onebuilding.org> Ogg: Re: [Equest-users] Details report  Here are two screenshots explaining the differences between the two reports.  Does this answer your question?  If not I will explain in more detail.
On Wed, Feb 11, 2009 at 11:49 AM, fposer at libero.it <fposer at libero.it> wrote:
 Hi folks,  i have a question for you.  Comparing the "REPORT – SS-D Building HVAC Load Summary" with the "REPORT – LS-D Building Monthly Loads Summary"  I' ve noticed that the values of heating and cooling energy are different between the two reports. Why it's happen? What's the difference between the two reports?  Thanks a lot. _______________________________________________ Equest-users mailing list http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

-- Steve MignognaAtelier Ten 

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090213/857b6b97/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ss.JPG
Type: image/jpeg
Size: 95999 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090213/857b6b97/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ls.JPG
Type: image/jpeg
Size: 108118 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090213/857b6b97/attachment-0001.jpeg>