[Equest-users] Secondary loop sizing in equest

[Doug Maddox]

Hi,

 

I am having trouble sizing my secondary chilled water loop in eQuest.  I
would like to size the loop based on the capacity of the installed plant
equipment, and I have set SIZING-OPTION = PRIMARY.  The secondary loop
appears to be sized based on air handler cooling coil capacity, which is
tied to zone CFM levels.  If I double fan supply flow, the loop capacity
doubles.  

 

Has anyone else had this problem? 

 

Does anyone have a solution?

 

Thanks,

Doug Maddox, PE

THE WEIDT GROUP
  
5800 Baker Road
Minnetonka, MN 55345
T 802-262-1033
F 952.938.1480
www.twgi.com <blocked::http://www.twgi.com/> 
DougM at twgi.com <blocked::mailto:DougM at twgi.com> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090102/3376fa0c/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 1223 bytes
Desc: image001.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090102/3376fa0c/attachment.gif>