[Equest-users] Residential and commercial rates

[John Aulbach]

Hassan:

I would do so, and it isn't too difficult to do. Define both rates in the program, assign them to separate electric meters, and have the electric meters assigned to the separate loads.

John Aulbach

--- On Wed, 7/8/09, Zareh, Hassan <Hassan.Zareh at stantec.com> wrote:

> From: Zareh, Hassan <Hassan.Zareh at stantec.com>
> Subject: [Equest-users] Residential and commercial rates
> To: equest-users at lists.onebuilding.org
> Date: Wednesday, July 8, 2009, 11:01 AM
> 
> Stantec
>  
> 
> #yiv1977345029
> {MARGIN-TOP:25px;FONT-SIZE:10pt;MARGIN-LEFT:25px;COLOR:#000000;FONT-FAMILY:Arial;}
> 
> 
>  
>  
> Hi,
> I'm modeling a
> condo  based on the 
> ASHRAE. Do I need to separate the electricity consumption
> based on residential 
> rates (units) and Commercial rates (Mech room and
> equipment)?
>  
> Thanks
>  
> Hassan Zareh, 
> M.Eng., P.Eng., LEED® AP
> Project Engineer
> Stantec Consulting 
> Ltd.
> 100 - 401 Wellington Street West
> Toronto ON M5V 
> 1E7
> Ph: (416) 598-7642
> Fx: (416) 596-6680
> hzareh at stantec.com 
> 
> stantec.com 
> 
>  
> The content of this 
> email is the confidential property of Stantec and should
> not be copied, 
> modified, retransmitted, or used for any purpose except
> with Stantec's written 
> authorization. If you are not the intended recipient,
> please delete all copies 
> and notify us immediately.
>  
> ü
> Please 
> consider the environment before printing this
> email. 
> 
> -----Inline Attachment Follows-----
> 
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank
> message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>