[Equest-users] Receptacle loads

[John Aulbach]

Rebecca:

The only time there is a "Rules processor" is when you are running a California Title-24 compliance model.

You can change any value in the Detailed Edit mode as you wish. You just cannot go back to the Wizard, as the value will revert back to the Wizard assigned value.


John Aulbach

--- On Mon, 7/13/09, Grove, Rebecca <RGrove at ThorntonTomasetti.com> wrote:

> From: Grove, Rebecca <RGrove at ThorntonTomasetti.com>
> Subject: [Equest-users] Receptacle loads
> To: equest-users at lists.onebuilding.org
> Date: Monday, July 13, 2009, 6:25 AM
> 
> 
> 
>  
>  
> Receptacle loads
> 
>  
> 
> 
> In a project we are working
> on, the design receptacle load is 0.75 W/sf, not the default
> value of 1.7 W/sf. I was wondering if there was any way to
> change this. The DOE-2 help file says that "Receptacle
> loads are automatically assigned by the rules processor
> regardless of values input by the user in the wizard,
> detailed interface or BDL input file. All user input values
> are ignored by the rules processor." Is this true? Is
> there any way around this?
> 
> Thanks!
> 
> 
> 
> 
> Rebecca
> Grove, LEED AP
> 
> 
> Senior
> Engineer
> 
> 
> Thornton
> Tomasetti
> 
> 
> One Audubon
> Street, Fourth Floor
> 
> 
> New Haven,
> CT  06511
> 
> 
> T 203.672.1390  F 203.672.1391 
> 
> 
> 
> D 203.672.1436  
> 
> 
> RGrove at ThorntonTomasetti.com
> 
> 
> www.ThorntonTomasetti.com
> 
> 
> 
> 
> 
> 
> <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
> 
> The information in this email and any attachments may
> contain
> 
> confidential information that is intended solely for the
> 
> attention and use of the named addressee(s). This message
> or
> 
> any part thereof must not be disclosed, copied,
> distributed
> 
> or retained by any person without authorization from the
> 
> addressee. If you are not the intended addressee, please
> 
> notify the sender immediately, and delete this message.
> 
> <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
> 
> 
>  
> 
> -----Inline Attachment Follows-----
> 
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank
> message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>