[Equest-users] Building Orientation

Madhav Munshi madhavmunshi at gmail.com
Wed Jul 29 07:44:53 PDT 2009


Hi Hasan,

Im assuming that all of your buildings are separate building shells.
In the detailed interface, you can click on the respective shell in the
'Building Shells' tab and input the exact value of the azimuth to get the
correct orientation.

Madhav

On Wed, Jul 29, 2009 at 10:03 AM, Zareh, Hassan <Hassan.Zareh at stantec.com>wrote:

>  Hi
> I'm modeling a large complex that includes several Identical building as
> well, but they are not on the same orientation. anybody knows how can I
> rotate just some of this buildings?
> In building footprint page there are some options for building orientation,
> but this doesn't work for me because my required orientation is between
> "North" and "North North West".
>
> Thanks
>
> *Hassan Zareh, M.Eng., P.Eng., LEED® AP*
> Project Engineer
> Stantec Consulting Ltd.
> 100 - 401 Wellington Street West
> Toronto ON M5V 1E7
> Ph: (416) 598-7642
> Fx: (416) 596-6680
> hzareh at stantec.com
> *stantec*.com <http://www.stantec.com/>
>
> The content of this email is the confidential property of Stantec and
> should not be copied, modified, retransmitted, or used for any purpose
> except with Stantec's written authorization. If you are not the intended
> recipient, please delete all copies and notify us immediately.
>
> ü Please consider the environment before printing this email.
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090729/bdc5282c/attachment-0002.htm>


More information about the Equest-users mailing list