[Equest-users] Building rotations

John Aulbach jra_sac at yahoo.com
Fri Jun 19 10:26:49 PDT 2009


John:

I am unsure of LEED, but I will bet you cannot use the surrounding building shading for just the complicated reasons you mention. I did a LEED Base Case of a building built into the side of foothills. When I rotated the building for the other directions, I left the undeground parts right where they were, essentially rotaing the foothills.

Otherwise, people might get "fancy" with shading. 

My impression of the USGBC approach is that they are trying to "level playing field" approaches such as this.

John Aulbach

--- On Fri, 6/19/09, Grando, John <JGrando at cosentini.com> wrote:

> From: Grando, John <JGrando at cosentini.com>
> Subject: [Equest-users] Building rotations
> To: "equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
> Date: Friday, June 19, 2009, 6:59 AM
> 
> 
>  
>  
> 
> 
> 
>  
> 
> Hello,
>  
> I have a question regarding modeling for LEED.  I
> am working on a building in New York City and it is
> surrounded by much higher buildings.  Are we allowed to
> model the surrounding buildings in the baseline and
> design?  If so, when I rotate it, do I keep
> readjusting it so that it doesn’t intersect with the
> fixed shades?
>  
> It seems like the other buildings should be taken into
> account considering that this building is around 80% glass
> but does not receive a large amount of sunlight.
>  
>  
> John Grando LEED AP| Mechanical Engineer
> 
> 
> Phone: 212-615-3705
> | Fax: 212-615-3700
> 
> 
> jgrando at cosentini.com
> 
> 
> 
> 
> 
> Cosentini Associates - A Tetra
> Tech Company
> 
> 
> Two Pennsylvania Plaza -
> Third Floor - New York, NY 10121
> 
> 
> www.cosentini.com
> 
> 
> 
> 
> 
> 
>  
>  
>  
> 
> 
>  NOTICE OF CONFIDENTIALITY
> 
> This E-mail message and its attachments (if any) are
> intended solely for the use of the addressees hereof.  In
> addition, this message and the attachments (if any) may
> contain information that is confidential, privileged and
> exempt from disclosure under applicable law.  If you are not
> the intended recipient of this message, you are prohibited
> from reading, disclosing, reproducing, distributing,
> disseminating or otherwise using this transmission. 
> Delivery of this message to any person other than the
> intended recipient is not intended to waive any right or
> privilege.  If you have received this message in error,
> please promptly notify the sender by reply E-mail and
> immediately delete this message from your system.
>  
> 
> 
> 
> -----Inline Attachment Follows-----
> 
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank
> message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
> 


      



More information about the Equest-users mailing list