[Equest-users] Gravity Relief Vs Power Relief

[David Dowling]

When I specify the return fan as relief within the wizard interface, it
dose not show a return fan being specified in the detailed interface.
How dose the detailed interface represent the return fan as relief
within the detailed interface when it has been specified in the wizard
interface?

 
David Dowling
Mechanical Designer
WEST PLAINS ENGINEERING, INC.
1750 Rand Road
Rapid City, SD  57702
Phone: (605) 348-7455  Fax: (605) 348-9445
david.dowling at westplainsengineering.com
www.westplainsengineering.com

 

 
-----Original Message-----
From: B. Fountain [mailto:bfountain at greensim.com] 
Sent: Tuesday, June 16, 2009 10:07 AM
To: David Dowling
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Gravity Relief Vs Power Relief

In the wizard, you can specify whether the return fan is relief, return
or
none (gravity relief).  Same in detailed interface.

> Is it possible in eQUEST to compare an air handler with powered relief
> vs gravity relief?  If so, can this be done within the wizard
interface
> or must it be completed within the detailed interface.
>
>
>
>
>
> David Dowling
>
> Mechanical Designer
>
> WEST PLAINS ENGINEERING, INC.
>
> 1750 Rand Road
>
> Rapid City, SD  57702
>
> Phone: (605) 348-7455  Fax: (605) 348-9445
>
> david.dowling at westplainsengineering.com
>
> www.westplainsengineering.com <http://www.westplainsengineering.com/>
>
>
>
>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>