[Equest-users] Building rotations

Steve Mignogna smignogna at gmail.com
Mon Jun 22 12:12:07 PDT 2009


John-

You do NOT model any surrounding building in the Baseline model. In fact,
you don't take into account any type of shading benefits in the Baseline
model.


-- 
Steve Mignogna
Atelier Ten

On Fri, Jun 19, 2009 at 2:49 PM, Vikram Sami <VSami at lasarchitect.com> wrote:

> Appendix G requires that you make all walls non-shading surfaces so I'm
> pretty sure you don't model the surrounding buildings for your baseline
> Vikram Sami, LEED AP
> Direct Phone 404-253-1466 | Direct Fax 404-253-1366
>
> LORD, AECK & SARGENT ARCHITECTURE
> Responsive Design · Technological Expertise · Exceptional Service
> www.lordaecksargent.com
>
> ________________________________
>
> From: equest-users-bounces at lists.onebuilding.org on behalf of John Aulbach
> Sent: Fri 6/19/2009 13:26
> To: equest-users at lists.onebuilding.org; JohnGrando
> Subject: Re: [Equest-users] Building rotations
>
>
>
>
> John:
>
> I am unsure of LEED, but I will bet you cannot use the surrounding building
> shading for just the complicated reasons you mention. I did a LEED Base Case
> of a building built into the side of foothills. When I rotated the building
> for the other directions, I left the undeground parts right where they were,
> essentially rotaing the foothills.
>
> Otherwise, people might get "fancy" with shading.
>
> My impression of the USGBC approach is that they are trying to "level
> playing field" approaches such as this.
>
> John Aulbach
>
> --- On Fri, 6/19/09, Grando, John <JGrando at cosentini.com> wrote:
>
> > From: Grando, John <JGrando at cosentini.com>
> > Subject: [Equest-users] Building rotations
> > To: "equest-users at lists.onebuilding.org" <
> equest-users at lists.onebuilding.org>
> > Date: Friday, June 19, 2009, 6:59 AM
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Hello,
> >
> > I have a question regarding modeling for LEED.  I
> > am working on a building in New York City and it is
> > surrounded by much higher buildings.  Are we allowed to
> > model the surrounding buildings in the baseline and
> > design?  If so, when I rotate it, do I keep
> > readjusting it so that it doesn't intersect with the
> > fixed shades?
> >
> > It seems like the other buildings should be taken into
> > account considering that this building is around 80% glass
> > but does not receive a large amount of sunlight.
> >
> >
> > John Grando LEED AP| Mechanical Engineer
> >
> >
> > Phone: 212-615-3705
> > | Fax: 212-615-3700
> >
> >
> > jgrando at cosentini.com
> >
> >
> >
> >
> >
> > Cosentini Associates - A Tetra
> > Tech Company
> >
> >
> > Two Pennsylvania Plaza -
> > Third Floor - New York, NY 10121
> >
> >
> > www.cosentini.com
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >  NOTICE OF CONFIDENTIALITY
> >
> > This E-mail message and its attachments (if any) are
> > intended solely for the use of the addressees hereof.  In
> > addition, this message and the attachments (if any) may
> > contain information that is confidential, privileged and
> > exempt from disclosure under applicable law.  If you are not
> > the intended recipient of this message, you are prohibited
> > from reading, disclosing, reproducing, distributing,
> > disseminating or otherwise using this transmission.
> > Delivery of this message to any person other than the
> > intended recipient is not intended to waive any right or
> > privilege.  If you have received this message in error,
> > please promptly notify the sender by reply E-mail and
> > immediately delete this message from your system.
> >
> >
> >
> >
> > -----Inline Attachment Follows-----
> >
> > _______________________________________________
> > Equest-users mailing list
> > http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> > To unsubscribe from this mailing list send  a blank
> > message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
> >
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090622/24c6d90b/attachment-0002.htm>


More information about the Equest-users mailing list