[Equest-users] PVAVS System Heat Source trouble

[Patrick Darby]

Hello All,
 
I have been attempting to model a packaged VAV system with gas-fired
system heating and no re-heat or perimeter "baseboard" heating.
 
Using the PVAVS system, I have specified gas fired heating or "furnace"
as my system "heat source" with "zone heat source" as "not installed". 
 
My problem is that I cannot activate the system heat source and the
system is providing no heat to the zones!!! I have input various values
for "zone entering max supply temp" and "hot deck max leaving temp" but
to no avail.
 
Has anyone run into this issue in the past, or does anyone have advice
on how to activate the gas fired heating system?
 
Thanks for any help!
 




Patrick Darby, BScE








Mechanical Engineering Services
 
 
The Walter Fedy Partnership 
Phone: 519-576-2150 x271
Fax: 519-576-5499
Web: www.twfp.com
 

The information contained in this e-mail is intended only for the individual or entity to whom it is addressed. Its contents (including any attachments) may contain confidential and/or privileged information. If you are not an intended recipient you must not use, disclose, disseminate, copy or print its contents. If you receive this e-mail in error, please notify the sender by reply e-mail and permanently delete the message. Information, opinions or conclusions contained in this message that do not relate to the official business of "The Walter Fedy Partnership" will be understood as neither given nor endorsed by it.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090323/069239c4/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: twfp.jpg
Type: image/jpeg
Size: 8530 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090323/069239c4/attachment.jpg>