[Equest-users] Negatively Pressurizing a Zone
Robby Oylear
robbyo at rushingco.com
Fri Mar 27 09:24:36 PDT 2009
I'm trying to model a room that will be negatively pressurized with
respect to the rooms around it. Essentially I want to have a zone that
will have less outside air being brought into it than exhaust air leaving.
Is there any way to do this in eQUEST?
I tried limiting the maximum outside air percentage of my system, but when
the zonal exhaust airflow exceeds this amount eQUEST automatically
increases the outside air being brought in by my system.
Any help would be appreciated.
Thanks,
Robby Oylear, LEEDR AP
Mechanical Engineer
direct: 206.788.4571
cell: 206.354.2721
www. <http://www.rushingco.com> rushingco.com
Logo_B&W_1
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090327/ca6d3c40/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1804 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090327/ca6d3c40/attachment.jpeg>
More information about the Equest-users
mailing list