[Equest-users] How to model CO2 Cooling systems?

[Aswan Ali]

Hi all,

 

Hope someone has few minutes to look into this please. 

 

Since eQuest does not allow multiple systems to a single zone is it
possible to make the VAV the main system and apply the duty loads from
the CO2 systems as process loads in the spaces where the CO2 equipment
is located as shown on the sketch.

 

My concerns are:

 

1.	The receptacle or process loads options available in the DD
wizard are for Non-HVAC Enduses
2.	How to model the heat rejection from the liquid CO2 loop to the
chilled water loop

 

Please let me know your thoughts on this.

 

Many thanks,

 

Aswan

 

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090319/55766a34/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Sketch.pdf
Type: application/octet-stream
Size: 82200 bytes
Desc: Sketch.pdf
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090319/55766a34/attachment-0002.obj>