[Equest-users] Loop-Loop HP

[Vikram Sami]

I'm trying to model a domestic hot water system that is fed by a
water-water heat pump attached to a ground loop heat exchanger loop
(it's a secondary loop off a GSHP loop). I figure the way to do it is
the loop-loop heat pump chiller option. The DOE2 documentation shows the
diagram below for heating only. 

Has anyone modeled this successfully? If so, how do you get rid of the
chilled water loop? I would like to assign all of the heat loss to the
ground loop instead of a chilled water loop.  

 <<Picture (Device Independent Bitmap)>> 

Vikram Sami, LEED AP 
Direct Phone 404-253-1466 | Direct Fax 404-253-1366 
LORD, AECK & SARGENT ARCHITECTURE
1201 Peachtree Street NE, Suite 300, Atlanta, GA 30361 
Responsive Design * Technological Expertise * Exceptional Service 
Please visit our new website | www.lordaecksargent.com
<file:///\\www.lordaecksargent.com\> 
P Think GREEN before you print.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090520/38b6ef68/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/bmp
Size: 395990 bytes
Desc: Picture (Device Independent Bitmap)
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090520/38b6ef68/attachment.bin>