[Equest-users] FW: Electrical demand and consumption

[Kosuke]

Reports from eQuest for base model and proposed model are attached.  Misc. load consumption is same, but demand is different.  Changes that I have made for proposed model was Lighting, exterior lighting, and HVAC equipment from air cooled heatpump with electrical heating to geothermal heat pump.

 

 

Kosuke Kato, LEED AP

Senior Energy Modeling Engineer

CMTA Consulting Engineers, Inc. 
Louisville - Lexington KY 
Lou. 502 326 3085 
Lex. 859 253 0892 
kosuke at cmtaegrs.com 
www.cmtaegrs.com <blocked::http://www.cmtaegrs.com/>  

We've gone green! Please verify the necessity of printing this email - thank you. 

 

From: Howe, Timothy [mailto:Timothy.Howe at stantec.com] 
Sent: Friday, May 22, 2009 10:10 AM
To: Kosuke
Subject: RE: [Equest-users] Electrical demand and consumption

 

Why don't you attach pdfs of the baseline and proposed eQUEST consumption and demand reports.  So wee can see exactly what you mean.

 

Tim.

 

Timothy Howe, MS, LEED® AP
Mechanical Engineer
Stantec
2060 Brighton-Henrietta Town Line Road
Rochester NY 14623-2792
Ph:   (585) 413-5347
Fx:   (585) 272-1814
Cell: (585) 330-8681

stantec.com <http://www.stantec.com/>  

 

The content of this email is the confidential property of Stantec and should not be copied, modified, retransmitted, or used for any purpose except with Stantec's written authorization. If you are not the intended recipient, please delete all copies and notify us immediately.

 

ü Please consider the environment before printing this email.

 

 

________________________________

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Kosuke
Sent: Friday, May 22, 2009 9:42 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Electrical demand and consumption

Does anybody know how eQuest calculates demand for process loads? I have a base model and a proposed model that have same receptacle loads and schedule. Consumption for both model came out exactly same, but demand came out to be 7% higher for the proposed model.  I am modeling this building for LEED.  Did anybody run into this problem?

 

 

Kosuke Kato, LEED AP

Senior Energy Modeling Engineer

CMTA Consulting Engineers, Inc. 
Louisville - Lexington KY 
Lou. 502 326 3085 
Lex. 859 253 0892 
kosuke at cmtaegrs.com 
www.cmtaegrs.com <blocked::http://www.cmtaegrs.com/>  

We've gone green! Please verify the necessity of printing this email - thank you. 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090522/a3a2cf1a/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: EA Credit 1 - Baseline 0 degrees.pdf
Type: application/octet-stream
Size: 160966 bytes
Desc: EA Credit 1 - Baseline 0 degrees.pdf
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090522/a3a2cf1a/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: EA Credit 1 - Proposed Model.pdf
Type: application/octet-stream
Size: 157790 bytes
Desc: EA Credit 1 - Proposed Model.pdf
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090522/a3a2cf1a/attachment-0001.obj>