[Equest-users] simulation - loop error

[John Aulbach]

Yanjun:

Is your loop connected to any load? Check the tree directory on the left side of the scrren.

John Aulbach

--- On Wed, 5/20/09, Yanjun Cui <yanjun at petersenengineering.com> wrote:

> From: Yanjun Cui <yanjun at petersenengineering.com>
> Subject: [Equest-users] simulation - loop error
> To: "equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
> Date: Wednesday, May 20, 2009, 1:19 PM
> 
> 
> 
>  
>  
> 
> 
> 
> 
> 
> 
>  
> 
> 
> 
> Hello, 
> 
>    
> 
> When I try
> to simulate the model, a error message "loop has zero
> flow" pop-up. The
> error detail in ATTN simulation messager is "Loop: Hot
> Water Loop has zero
> design flow.Check input for consistency, or specify design
> loads.". How to
> handle it?  
> 
>    
> 
> Thanks in
> advance. 
> 
>    
> 
> Yanjun
> 
>  
> 
>    
> 
> 
> 
>  
> 
> 
> 
> -----Inline Attachment Follows-----
> 
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank
> message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>