[Equest-users] HVAC Loads Based on eQuest

[David S Eldridge]

I think there is another question about how detailed your load calculation will be in breaking down the building compared to the resolution required for your energy model, but you might be able to navigate the differences successfully.  And for some projects there may not be much difference.

Also whether the same person is doing both tasks, and their familiarity with both software packages.  Arturo, if you were doing both then great, but what if you have to hand the load calc tasks off to someone at your office that doesn't use eQuest?

David
http://www.grummanbutkus.com




From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Hernandez, Arturo
Sent: Thursday, November 05, 2009 10:41 AM
To: Howe, Timothy; James Hess; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] HVAC Loads Based on eQuest

You are correct. Therefore one would just have to schedule that to be off all the time in HDD. So are there any other any concerns with using eQuest? Is the answer simply: It is easier to get the load calculations from Trane Trace?


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091105/14cbfd3d/attachment-0001.htm>