[Equest-users] changing AC EIR in Detailed Edit?

[ashu gupta]

Mike,

 

Please go through the below picture to input the EIR of cooling system.

 

 



 

 

Thanks,

Ashu Gupta,
Project Engineer,
Kamal Cogent Energy,
Kamal Ratan Chanbers 1st Floor,
Opp. GPO, M.I. Road,
Jaipur 302001
Ph 141 2373185(W)
Ph 9251665008(M)
 <mailto:kce2 at kamalcogentenergy.com> kce2 at kamalcogentenergy.com
 <http://www.kamalcogentenergy.com> www.kamalcogentenergy.com



  _____  

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Mike Diess
Sent: Thursday, November 19, 2009 2:49 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] changing AC EIR in Detailed Edit?

 

Where do you go to input or change the AC system EIR in Detailed Edit? My
system is sgl pkg. AC. I cannot find the option to input EIR in the: air
side/ component tree/ AC system/ Basics menu. There are fields called "DX
performance data" but they are either grey or generate an error if I attempt
to create a value. ANy clues?

thanks

Mike

-- 
Mike Diess, PE, LEED AP
LNI Consulting Engineering  
mike.diess at gmail.com
cell: 720-427-7954   fax: 608-646-1063

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091119/050dd0b4/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 61785 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091119/050dd0b4/attachment-0002.jpeg>