[Equest-users] Parametric Titles

[John Aulbach]

Vikram et al:

Yes, this option HAS ben around a spell. Very useful to name the Parametric Run and have it show up on the Title. I usually use Title Line 2, as I don't believe it is mormally used.

John




________________________________
From: Vikram Sami <VSami at lasarchitect.com>
To: Jason Wendel <jwendel at heatheng.com>; equest-users at lists.onebuilding.org
Sent: Fri, November 20, 2009 3:14:52 PM
Subject: Re: [Equest-users] Parametric Titles


I did some digging into this. Apparently you can pick the “title option in the parametric components now (I think this is a new feature, although it might have always been there and I didn’t know about it).  Once you pick that, it allows you to define title lines 1-5
 
 
 
Thanks to Jason and whoever originally posted this – this is pretty useful
 
Vikram Sami,LEED AP
Direct Phone 404-253-1466 | Direct Fax 404-253-1366
LORD, AECK& SARGENTARCHITECTURE


 
From:equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Jason Wendel
Sent: Friday, November 20, 2009 3:13 PM
To: 'equest-users at lists.onebuilding.org'
Subject: Re: [Equest-users] Parametric Titles
 
How would I do it in Parametric runs?  I can set it up to do the rotations for LEED, but it doesn’t have the titles to distinguish between the rotations on the printout.  I noticed in the attachment that whoever did  this put Titles in as parametric components.  Does that do it?  If so, how do I do it?
 
-Jason
 
From:Brett Fero [mailto:bfero at robsonwoese.com] 
Sent: Friday, November 20, 2009 11:11 AM
To: Jason Wendel
Subject: Re: [Equest-users] Parametric Titles
 
Jason,
 
I don't know that you can input the titles directly from DD mode.  I open the inp file in a word processor and paste in the following below "Title, Run Periods, Design Days, Holidays" block as seen on the first page of the file.
 
$ ---------------------------------------------------------
$              Title, Run Periods, Design Days, Holidays
$ ---------------------------------------------------------
 
TITLE           
   LINE-1           = *Title 1*
   LINE-2           = *Title 2*
   LINE-3           = *Title 3*
   LINE-4           = *Title 4
..
 
The last two periods are important to include. You can also edit the titles in the parametric runs.
 
Brett Fero
 
On Fri, Nov 20, 2009 at 12:43 PM, Jason Wendel <jwendel at heatheng.com> wrote:
I noticed in this attachment from an email that there is a title as a parametric component, does that put a title on the report?  If so, how do you do it?  I’ve tried a bunch of stuff and can’t get it to work.
 
-Jason

________________________________________________________________________
This Email has been scanned for all viruses by PAETEC Email Scanning Services, utilizing MessageLabs proprietary SkyScan infrastructure. For more information on a proactive anti-virus service working around the clock, around the globe, visit http://www.paetec.com/.
________________________________________________________________________

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091121/04fc02ff/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 26896 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091121/04fc02ff/attachment-0004.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 21369 bytes
Desc: image002.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091121/04fc02ff/attachment-0005.png>