[Equest-users] Propane vs Gas

[ron lamarre]

Hi to all:

Does anyone know how to revise the fuel type from natureal gas to propane from within the detailed interface.  I've made all the changes in the FM1 metering (LPG and the 95,500 btu/gal) and the ESE and ESF reports are indicating the number of gallons and the total cost; however, the Parms.csv file is not.

For instance:
When the parametric runs are complete, the ESE and ESF reports show the total number of propane gallons used and the total propane cost spent.

The Parms.csv file shows the total number of Therms used and zero (0) for the total fuel cost.  Is there any way to adjust the Parms.csv report to show propane gallons and the total cost?

Thanks for your help.
 
Ron Lamarre, AIA, NCARB
Architect - LEED AP


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091001/7e3916ff/attachment.htm>