[Equest-users] Metric project.

[Christopher Jones]

Equest may not be very helpful here.  You can 
always use EE4 - a simple interface to DOE2.1e 
that allows full input in metric and converts to 
imperial for running the model.  I find that EE4 
will give just as accurate an answer a equest for 
over 90% of the building simulation problems I face.  Get it at:

http://canmetenergy-canmetenergie.nrcan-rncan.gc.ca/eng/software_tools/ee4.html

Note that EE4 generates the Budget Case for the 
MNECB but not for ASHRAE 90.1.  As with equest, 
you will have to create your own Budget case.


At 01:25 PM 10/8/2009, John Howe wrote:
>Content-class: urn:content-classes:message
>Content-Type: multipart/alternative;
>         boundary="----_=_NextPart_001_01CA483C.5DDB8FD5"
>
>
>I have a job that is designed entirely in 
>metric, including the CAD files. Can I do the entire model in metric?
>
>
>John Howe, P.E., LEED AP
>Project Engineer
>jba consulting engineers
>JBA Denver · 13772 Denver West Pkwy, Suite 200 · Lakewood, CO 80401
>p 303.985.3260 · f 303.987.2304  · jhowe at jbace.com
>
>_______________________________________________
>Equest-users mailing list
>http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>To unsubscribe from this mailing list send  a 
>blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

 >>
Christopher Jones, P.Eng.
Suite 1801, 1 Yonge Street
Toronto, ON M5E1W7
Tel. 416-203-7465
Fax. 416-946-1005
email cj at enersave.ca
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091014/075255c4/attachment-0001.htm>