[Equest-users] Classroom unit ventilator

[John Aulbach]

I am guessing a two pipe changeover fan coil. That literally is what you describe,
 

 
John R. Aulbach, PE, CEM
Senior Energy Engineer



Partner Energy
1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
www.ptrenergy.com | jaulbach at ptrenergy.com
 
 

--- On Fri, 10/16/09, Seun Odukomaiya <sodukomaiya at laceindy.com> wrote:


From: Seun Odukomaiya <sodukomaiya at laceindy.com>
Subject: [Equest-users] Classroom unit ventilator
To: "equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
Date: Friday, October 16, 2009, 8:36 AM








eQuest Users,
What is the best way to model classroom unit ventilators? I'm building an energy model for a school where all the classrooms are served by a unit ventilator. The units are served by a two-pipe loop with summer/winter changeover. I noticed that the unit ventilator in equest is heating only. I'm toying with using either a fan coil unit with the right performance specs, or maybe a single zone with reheat system. Has anyone done this before? Any ideas, or tricks would be greatly appreciated. Thanks again.
 
Seun Odukomaiya, LEED AP  -  Mechanical Engineer
L'Acquis Consulting Engineers
280 East 96th Street, Suite 280
Indianapolis, IN 46240
voice:  (317) 706-2075
fax:     (317) 706-2076
email:  sodukomaiya at laceindy.com 
web:  www.laceindy.com
P Please consider the environment before printing this e-mail.
 
-----Inline Attachment Follows-----


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091016/8f3f7866/attachment-0001.htm>