[Equest-users] SUPPLY-CFM smaller than the total specified ZONE EXHAUST-CFM ERROR

[Charles Land]

Im assuming its because the supply flow is not constant. When the zones airflow cuts back you have a higher exhaust flow.

-----Original Message-----
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of shahram at admenergy.com
Sent: Monday, October 19, 2009 4:26 PM
To: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] SUPPLY-CFM smaller than the total specified ZONE EXHAUST-CFM ERROR

Hello:

Iam trying to simulate a Lab building with VAV system, Exchaut Fans and 
100% OA and getting the ERROR Message:

"has a specified SUPPLY-CFM smaller than the total specified ZONE 
EXHAUST-CFM"

I am specifying the same suppley cfm for exhaust cfm for each zone.

Thanks,



_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG