[Equest-users] Parametric Run Error

John Aulbach jra_sac at yahoo.com
Fri Sep 4 09:24:36 PDT 2009


Seun:
 
Could you also send the .PRD file, containing what YOU input for a parametric run.
 
This is a HUGE model, so I hope you have 4gB on your memory. I have 1 gB of memory, and the Base model ran. But a 500kB .INP is large, in my book. That may be why you are having difficulties.
 
But please send the .PRD file to precisely duplicate your run.
 
John Aulbach

--- On Fri, 9/4/09, Seun Odukomaiya <sodukomaiya at laceindy.com> wrote:


From: Seun Odukomaiya <sodukomaiya at laceindy.com>
Subject: [Equest-users] Parametric Run Error
To: "equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
Date: Friday, September 4, 2009, 8:09 AM








Dear eQuest users,
I have modeled a building in eQuest with a lot of glazing on the south end. In an effort to evaluate the effect of the building orientation, I have created a parametric run to rotate the building azimuth by 180 degrees. When I run the simulation, it seems to go through all the motions correctly. It runs the simulation for the baseline case, and then again for the case with the building being rotated by 180 degrees. Once the second simulation is complete, however, I get the following error messages, and it kicks me out of eQuest:
 

 

 
Has anyone else encountered these issues with eQuest. I would think that this was a relatively simple Parametric run to evaluate. Any help at all is greatly appreciated.  I have attached the associated files. Thank you in advance.
 
Seun Odukomaiya, LEED AP  -  Mechanical Engineer
L'Acquis Consulting Engineers
280 East 96th Street, Suite 280
Indianapolis, IN 46240
voice:  (317) 706-2075
fax:     (317) 706-2076
email:  sodukomaiya at laceindy.com 
web:  www.laceindy.com
P Please consider the environment before printing this e-mail.
 
-----Inline Attachment Follows-----


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090904/6005d7a2/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 6683 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090904/6005d7a2/attachment-0004.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 7610 bytes
Desc: image002.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090904/6005d7a2/attachment-0005.png>


More information about the Equest-users mailing list