[Equest-users] Negative Net Wall Area Error

[Lam, Linda]

Jason,
 
did you check if you have a frame width defined?
 
Linda Lam, LEED(r) AP
WSP FLACK+KURTZ
405 Howard St. San Francisco CA 94105
Direct  415.402.5813
 

________________________________

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Jason
Wendel
Sent: Thursday, September 10, 2009 2:50 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Negative Net Wall Area Error



I didn't have a problem till I added windows to my building, then all of
the sudden I am losing random walls throughout the building.  I've tried
re-designing the building and the same thing happened again.   How do I
get past it?

 

Error says:           Wall defined on  . . . has a net negative wall
area.

 

I haven't added more window than wall, and some of the walls that have
"disappeared" didn't even have windows.

 

-Jason

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090910/45df1fff/attachment-0002.htm>