[Equest-users] Default Fan EIR Not Allowed to Edit

Charles Land cland at geo-marine.com
Wed Apr 21 05:20:03 PDT 2010


Try simply making it constant volume instead of fan EIR then try playing with your kw/cfm or static pressure to get the results your looking for

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of YinRic
Sent: Wednesday, April 21, 2010 1:46 AM
To: Equest User
Subject: [Equest-users] Default Fan EIR Not Allowed to Edit

Hi Users,

On the SV-A report, the supply fan diversity factor for one HVAC system is 0, which leads to unreasonalbly low fan-power. In order to find out where the problem is, I edited the default Fan EIR into ForCurve w Dischage Dampers FPLR (before editing, the space is n/a in grey), and for "fan control" I chose Fan EIR FPLR accordingly (as shown in attachment 1). However, after simulation, I found the supply fan diversity factor is still 0. I reopened the model and found the edited Fan EIR jumped back to "n/a" in grey (as shown in attachment 2), refusing to be changed. I even tried to edit the .inp file directly, but the problem remains.

I have been wasting days on this issue, which is really killing me. It is obvious that a bad-looking SV-A report (attachment 3) doesn't work. Any help will be greatly appreciated.

Best Regards,
Rick, LEED AP
________________________________
搜索本应是彩色的,快来体验新一代搜索引擎-必应,精美图片每天换哦! 立即试用!<http://cn.bing.com/?form=CRMADS%20>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100421/d0f5ba37/attachment-0001.htm>


More information about the Equest-users mailing list