[Equest-users] Thermostat Setting

[Eric O'Neill]

Can't you just remove the sensitive project information from the files?
A text editor should allow you to find any "incriminating evidence" and
you can switch the weather file location so we won't even know where in
the world it's located :-) Unless you're modeling the pentagon, in which
case I'll quiet down.

 

And I doubt this is it, but you might want to double check your header
in the hourly report to make sure you're not looking at just the heating
setpoint (see attached pg.2 and below). The space isn't being cooled at
all, correct?

 

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Susan F
Sent: Thursday, April 22, 2010 11:47 AM
To: Carol Gardner
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Thermostat Setting

 

Unfortunately due to the sensitive nature of the project I cannot send
the files.  I have checked and my heating/cooling schedules are assigned
to the right locations.  

Could it be related to the design temperatures I have indicated for each
zone?  The tstat schedules are as I have stated below but I have the
design temperatures at 74 cooling and 72 heating.  The load temperature
(in the space definition) is 70.  My throttling range is 2.  Would any
of this cause problems?

On Thu, Apr 22, 2010 at 11:50 AM, Carol Gardner <cmg750 at gmail.com>
wrote:

Susan,

While in detailed data edit go onto one of your thermal zone
spreadsheets to look at your schedules. You will be able to see them
easily from there. Make sure you haven't accidentally put your heating
schedule in where your cooling schedule should be. If this doesn't work
zip up your .inp and .pd2 files and send them to us.

Good luck,
Carol

On Thu, Apr 22, 2010 at 6:11 AM, Susan F <modelsenergy at gmail.com> wrote:

	I have a model that does not seem to be switching the thermostat
between heating and cooling.  When I output the hourly data for the Zone
Thermostat Setting it seems to always be the heating setpoints (70
occupied and 64 unoccupied).  Any idea why this wouldn't be changing
over to cooling setpoints (75 occupied and 82 unoccupied) during the
warmer months?
	
	Thanks in advance.  

	_______________________________________________
	Equest-users mailing list
	
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
	To unsubscribe from this mailing list send  a blank message to 
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100422/a05ba66e/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 15391 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100422/a05ba66e/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DOE-2 Hourly Variables By System Type.pdf
Type: application/octet-stream
Size: 272230 bytes
Desc: DOE-2 Hourly Variables By System Type.pdf
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100422/a05ba66e/attachment-0001.obj>