[Equest-users] Thermal Mass Wall and R-Value

Carol Gardner cmg750 at gmail.com
Thu Apr 22 15:29:32 PDT 2010


I agree with Karen. I have another thought though: could this be an
insulating concrete form wall (ICF) wall? Google ICF for info.

Carol

On Thu, Apr 22, 2010 at 2:39 PM, Karen Walkerman <kwalkerman at gmail.com>wrote:

> The best thing to do is model the actual wall construction, not just an
> equivalent R-value, then you will get both the thermal resistive and the
> mass effect properties in the model.
>
> --
> Karen
>
> On Thu, Apr 22, 2010 at 12:30 PM, Rob Hudson <rdh4176 at gmail.com> wrote:
>
>> That is the answer i was expecting to here.  thanks for your input
>>
>>
>> On Thu, Apr 22, 2010 at 12:27 PM, Bruce Easterbrook <bruce5 at bellnet.ca>wrote:
>>
>>>  That doesn't sound right.  Poured concrete has an R-value around
>>> 0.08/inch.  When "effective" is used commercially it normally is a hocus
>>> pocus addition for the mass effect but shouldn't be much more than 10%.
>>> eQuest would calculate it as a lag effect based on the mass, so a steady
>>> state value would be most appropriate.
>>> Bruce Easterbrook
>>>
>>>
>>> On 22/04/2010 10:38 AM, Rob Hudson wrote:
>>>
>>> When creating a model, i noticed that the R-value of the concrete i am
>>> using is the "effective" R-value, rated at 22.  Should i use this or should
>>> i ask the concrete manufacturer for a steady-state R-value which will be
>>> much more accurate based on the materials?
>>>
>>> --
>>> Rob Hudson
>>>
>>> _______________________________________________
>>> Equest-users mailing listhttp://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>>> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>>
>>>
>>> _______________________________________________
>>> Equest-users mailing list
>>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>>> To unsubscribe from this mailing list send  a blank message to
>>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>>
>>>
>>
>>
>> --
>> Rob Hudson
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100422/80deb48f/attachment-0001.htm>


More information about the Equest-users mailing list