[Equest-users] eQuest LEED Compliance Engine Errors

[Larry Yang]

Edward,

I had encountered the same error massage before. The only solution is so
far to check if you have any unconditioned zones that need to be changed
as conditioned no matter what they should be. After Equest generating
your LEED reference building successfully, you can turn them back. If
this is your problem the solution might work for you too. 

Larry Yang

_______________________________
Larry (Lijun) Yang

Enermodal Engineering Ltd. 

t: 519.743.8777 x271  
f: 519.743.8778
e: lyang at enermodal.com 



 

 

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Edward
Allen
Sent: Wednesday, December 01, 2010 6:35 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] eQuest LEED Compliance Engine Errors

 

Hello All,

 

I'm trying to use the LEED compliance analysis engine to build a budget
building based on proposed design previously input using the wizard.
The model as input runs through the normal simulation without error.
The compliance analysis returns the following error:

 

Assign zone to baseline floor system:  CRule: Eva() error posting
symbolic (value t.48092e-297) result to BDL

 

This error is repeated fifteen times in the compliance analysis error
window.

 

I'm running 3.64, and I know some compliance engine problems were fixed
for this version.  Has anyone else encountered this problem and
developed a solution?

 

Thanks,

 

 

Edward M. Allen, PE, CEM

LONG Energy Solutions

Technology for Better Buildings 

775.657.9180 office  720.217.1356 mobile  775.657.9180 fax

eallen at long.com

        http://www.long.com <http://www.long.com/> 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101202/4a592ecb/attachment-0001.htm>