[Equest-users] Baseline site lighting

[Keith Swartz]

Alan,

The area in the site lighting W/sq. ft. is the building area. It may be easier to wait until you are in the Detailed Interface where you can enter site lighting in kW instead of W/sq.ft.

________________________________
Keith Swartz, P.E., LEED AP

Energy Engineer / Senior Project Manager
Energy Center of Wisconsin
455 Science Drive, Suite 200, Madison, WI 53711
Phone: 608.238.8276 x123
Fax: 608.238.0523

The Buildings Team
Design decisions through energy, economics and emissions analysis.
www.ecw.org/Buildings<http://www.ecw.org/Buildings>

Energy Center University
Your gateway to sustainable design training and online education programs.
www.ecw.org/university/<http://www.ecw.org/university/>
From: Alan Crittendon [mailto:alanc at dwcei.com]
Sent: Tuesday, December 07, 2010 10:27 AM
To: 'eQuest'
Subject: [Equest-users] Baseline site lighting

Does 90.1-2007 set the amount of W/ft² for site lighting?  If so is it W/ft² for the bldg or the site and if the site how do you calc the site area?

Alan Crittendon, PE, LEED AP
DW Collier Engineering, Inc.
720 Broadway St.
Suite 100
South Fulton, TN 38257
(p) 731-479-2115
(f) 731-479-8018

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101207/282a2d94/attachment-0001.htm>