[Equest-users] Virtual Rate

[Kelsey VanTassel]

Check your units to make sure they are consistent. If you changed the billing unit on the meter, make sure that you also changed the unit label that shows up in the ES-D report. The default is therms and eQUEST won't automatically change it, you will have to override it.

Kelsey Van Tassel
Mechanical Engineer | kvantassel at sustaineng.com<mailto:kvantassel at sustaineng.com>
608.836.4488 ext. 20 | Fax: 608.836.4477

Sustainable Engineering Group
901 Deming Way, Suite 201
Madison, WI 53717
www.sustaineng.com<http://www.sustaineng.com/>


From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Alan Crittendon
Sent: Thursday, December 02, 2010 10:08 AM
To: 'eQuest'
Subject: [Equest-users] Virtual Rate

Looking at the ES-D energy cost summary, why is my virtual rate ($/unit) so much higher than the uniform energy charge ($/unit) I have in the utility rate properties box? Ive attached my baseline ES-D.

Alan Crittendon, PE, LEED AP
DW Collier Engineering, Inc.
720 Broadway St.
Suite 100
South Fulton, TN 38257
(p) 731-479-2115
(f) 731-479-8018

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101202/89953ec0/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: billing units.jpg
Type: image/jpeg
Size: 39500 bytes
Desc: billing units.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101202/89953ec0/attachment-0002.jpg>