[Equest-users] Equest Refrig

Grammy grammy.hkust at gmail.com
Thu Dec 9 06:07:43 PST 2010


I agree with Carol, and a text comparison software will help you to do such
work.

Normally I use Winmerge, small size, open source, and you can use it without
installation.

On Sat, Dec 4, 2010 at 1:52 AM, Carol Gardner <cmg750 at gmail.com> wrote:

> Hi Patrick,
>
> You can't go from the Detailed Edit mode back to the Wizard in any version
> of eQUEST without losing the changes you made in the Detailed Edit mode.
> There are ways to cut and paste input from one .inp file to another if you
> are familiar w/the BDL.
>
> Carol
>
> That being said, there are
>
> On Fri, Dec 3, 2010 at 9:28 AM, Wilkinson, Patrick <
> Patrick.Wilkinson at trane.com> wrote:
>
>>  If one makes a building model in equest through the wizard then opens it
>> in the refrigeration model; is it possible to open it back up in the regular
>> equest to change the envelope within the wizard without losing all the
>> refrigeration detail. Currently, I have to reenter all the refrigeration
>> equipment every time the building envelope is updated. (cannot use wizard
>> mode in refrig version) Ideally I am looking for way to import the
>> refrigeration equipment I have from one model into various other models
>> created in the wizard.
>>
>>
>>
>> Thanks for the help
>>
>>
>>
>> *Patrick Wilkinson, PE, LEED AP **
>> Project Engineer II - Energy***
>>
>> *(T) 626-435-1169*
>>
>> *(E) patrick.wilkinson at trane.com*
>>
>>
>>
>> *Trane Commercial Systems*
>>
>> *An Ingersoll Rand Company*
>>
>> *17760 Rowland Street, City of Industry, CA 91748 *
>>
>> *www.trane.com***
>>
>> * *
>>
>>
>> ------------------------------
>> The information contained in this message is privileged and intended only
>> for the recipients named. If the reader is not a representative of the
>> intended recipient, any review, dissemination or copying of this message or
>> the information it contains is prohibited. If you have received this message
>> in error, please immediately notify the sender, and delete the original
>> message and attachments.
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
>
> --
> Carol Gardner PE
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101209/bae1d756/attachment-0002.htm>


More information about the Equest-users mailing list